Baling press VPLK 1, Baling press VPLK 2

plk2_3

Baling press VPLK 1
  • one compression chamber
  • pressing head – part of the compression head is a hydraulic cylinder with a compression plate, hydraulic power unit, control panel and end switches to ensure proper operation of the press
  • tilting mechanism to enable the fulfillment of the chamber.
  • basic accessories – stacker, binding tape – 3 pieces
  • strapping types: string (250 ball), flat PVC tape (500m coil)
Specifications VPL-K-1
  • The pressing force of 50 kN
  • Operating pressure 150 bar
  • Cycle time 25 sec
  • Motor power 1.5 kW
  • Dimensions L x W x H 1.2 x 1.1 x 2 m
  • Weight 450 kg
  • Electrical connection 3 NPE Hz/400 50 V / 16 A
Baling press VPLK 2
  • two compression chambers
  • pressing head, which is manually adjustable over each bale chamber. Part of the compression head is a hydraulic cylinder with a compression plate, hydraulic power unit, control panel and end switches to ensure proper operation of the press
  • traveling track to allow adjustment of the compression head over each chamber.
  • basic accessories – stacker, binding tape – 6
Specifications VPL-K-2
  • The pressing force – 50 kN
  • Operating pressure – 150 bar
  • Cycle time – 25 sec
  • Motor power – 1.5 kW
  • Dimensions L x W x 2 x 1.1 x 2 m
  • Weight – 750 kg
  • Electrical connection 3 NPE Hz/400 50 V / 16 A