Description of main features and options of the stationary press VSP380 LH

With additional containers VRK 20-30

SStationary press VSP380 is securely screwed by anchor bolts into a solid concrete ground. All functions are operated with the buttons on the control panel. The system is controlled by a programmable module Siemens LOGO 24. The guiding rails ( usually a couple of 2m long pieces ) are placed in front of the press to allow continuous connection of the additional container with press. Switching the button makes the container connect automatically to the press with the help of arms that are hydraulically operated. Switching another button opens a shield ( guillotine ) that is placed on the container door, and starts the pressing cycle, which takes 50 seconds. The number of cycles can be adjusted according to the customer requirements. The pressing force is 240 bar. At 80% filling of the container a green bulb lights up on the panel. Also an acoustic signalisation can be installed. When the container is 100% full, a red bulb lights up and the press will stop running.

When the pressing stops, you switch the press into a manual mode – the remaining material is forced at about 240 bar pressure into the additional container and the shield of the container is closing down. The similar way as when connecting ( with arms and the control buttons ), the container is automatically disconnected, and another empty container can be connected. This system can be repeated continuously and allows fully automated operation. Additional containers ( type VRK ) are manufactured in sizes of 20 and 30 m3. For better emptying of the pressed waste, the containers are equipped with a chain wall or a moving roof.

 

Specifications VSP 380 LH

• Press force 380 kN
• Operating pressure 240 bar
• Cycle time 50 sec
• Volume 1 cycle of 1.97 m3
• Output 1 cycle of 1.47 m3
• Engine power 5.5 kW
• Container volume m3 20/26/30
• Dimensions L x W x H 2.5 x 2.5 x 1.5 m