Stationary press VSP380 LR

Stationary press VSP380 is firmly bolted to a concrete anchor bolts. All functions are controlled by the container buttons on the control panel and controlled by a programmable module Siemens LOGO 24. Guiding lines that are placed in front of the press allow seamless connection of additional container. After delivery of the container all the way to the press operator to press anchor hooks and latches ratchet technique screw tight container to attract the press.

Press the button the pressing cycle is initiated, which runs for 50 seconds. The number of cycles can be adjusted according to customer requirements. The pressing force is 240 bar. At 80% filling a container with indicator lights on the panel. The customer can be installed and audible alarm. At 100% fulfillment of the additional container on the panel and the red indicator lightst up and will stop pressing.

When you stop pressing on the control panel to press the manual operation and repressing the remaining material in the additional container. Then, the operator inserts into the holes locking rod and container permit disconnects ratchet screw. Waste can also be secured by tightening the network through the compression hole of the container.

Additional VRK containers are manufactured in sizes 20 and 30 m3. They are inside a mechanical device – a chain wall – which helps when emptying the container is emptied smoothly at maximum tonnage.

Specifications VSP 380 LR

• Press force 380 kN
• Operating pressure 240 bar
• Cycle time 50 sec
• Volume 1 cycle of 1.97 m3
• Output 1 cycle of 1.47 m3
• Engine power 5.5 kW
• Container volume m3 20/26/30
• Dimensions L x W x H 2.5 x 2.5 x 1.5 m